CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers, coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.
 
 
 
 
 
 
 

  

 

Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders


Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Mechanical Piping Equipment

Used Notching Machines

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

 

 

Used Sheet Metal Roll Former Machines

Roll forming is the continuous bending operation in which a long strip of sheet metal (or coiled steel) is passed through sets of rolls mounted on consecutive shafts, each set performing only an incremental part of the bend, until the desired cross-section profile is obtained.

We offer many Roll formers for all of your sheet metal shop's roll forming needs. Our inventory is continually being updated, if you do not see what you are looking for please call our office, a salesperson will be happy to assist in finding the right new or used machinery for your shop needs. CINCINNATI Precision Machinery 513-860-4133.

 

Lockformer 20 Ga. Pittsburgh Roll Forming Machine with Flanger and Drive Cleat Rolls

 

 

pittsburgh Rollforming machine

See More Pictures: Used Lockformer Pittsburgh Rollformer

 

 

 

 

Price - $4,500.00

Item #1682

  • Pittsburgh 20 Ga. Rollforming Machine
  • Manufacturer: Lockformer
  • Condition: Used, Good
  • Capacities: 20 Ga. Mild Steel
  • Electrics: 110V / 1PH
  • Drive Cleat Rolls - Outboard
  • Auto Guide Power Flanger Attatchment Included
  • Drive Cleat Rolls Included
  • 5/16" Pocket
  • 25 FPM
  • Approx. Dimensions: 36"L x 16.5"W x 42"H
  • Approx. Weight: 400Lbs
  • Approx. New List Price: $8,000.00
  • Location: CPM Warehouse

 

Return to TOP

 

Lockformer Snaplock / Buttonlock Cleatformer Roll Forming Machine

 

 

Lockformer Snaplock Rollformer

See More Pictures: Used Lockformer Snaplock Cleatformer Rollformer

 

 

 

 

Price - $7,500.00

Item #1665

  • Manufacturer: Lockformer
  • Condition: Used, Good
  • Electrics: 230V / 3PH
  • Motor: 5HP
  • capacities:
    • 20 Ga. Sheet Metal - Male & Female Snaplock
    • 22 Ga. Sheet Metal - "S" Cleats
  • Male & Female Snaplock Rolls & "S" Cleat Rolls
  • 100 FPM
  • 9 Forming Stations
  • No Slitter Attatchment
  • For HVAC Sheet Metal Ductwork
  • Approx. New List Price: $18,000.00
  • approx. dimensions: 60"L X 24"W X 40"H
  • Approx. Weight: 800lbs
  • Location: CPM Warehouse

 

Return to TOP

 

Engel "S" Cleat Pittsburgh & 3-N-1 Roll Forming Machine

 

Engel Roll Forming Machine

See More Pictures: Used Engel Rollformer

 

 

 

 

Price - $6,000.00

Item #1666

  • Manufacturer: Engel
  • Model: Rol-Formit PL-8-TR
  • Condition: Used, Good
  • Capacities:
    • 20 Ga. Pittsburgh
    • 22 Ga. "S" Cleat
    • 20 Ga. 3-N-1
  • Electrics: 230V / 1PH
  • 3-N-1 & Pittsburgh Rolls
  • "S" Cleat Inboard
  • No Slitter
  • Approx. Dimensions: 57"L x 17"W x 37"H
  • Approx. Weight: 600Lbs
  • Location: CPM Warehouse

 

Return to TOP

 

Lockformer Standing "S" Cleat Rollformer

 

 

Standing S Cleat Rollformer

See More Pictures: Used Lockformer Standing "S" Cleat Rollformer

 

 

 

 

Price - $14,500.00

Item # 1662

  • Standing "S" Cleat & Standing Seam Rollforming Machine
  • Manufacturer: Lockformer
  • Condition: Used, Good
  • Capacities: 20 Ga. Mild Steel
  • Electrics: 230V/3PH
  • 10 Station Rollformer
  • 1 1/8" Standing Seam Rolls and Flange Rolls
  • 1" Standing S Cleat Rolls Inboard
  • 5HP Motor
  • 60-70 FPM
  • Pass Line 33"
  • Approx. Dimensions: 84"L x 30"W x 37"H
  • Approx. Weight: 1700Lbs
  • New List Price: $39,000
  • Location: CPM Warehouse

 

Return to TOP

 

Lockformer Snaplock / Buttonlock Roll Forming Machine With "S" Cleat Former

See More Pictures: Used Lockformer Snaplock Rollformer

Price - $8,000.00

Item #1657

  • Manufacturer: Lockformer
  • Condition: Used, Good
  • Electrics: 230V / 3PH
  • Motor: 5HP
  • capacities: 20 Ga. Sheet Metal - Male & Female Snaplock
    22 Ga. Sheet Metal - "S" Cleats
  • Male & Female Snaplock Rolls
  • 100 FPM
  • 9 Forming Stations
  • "S" Cleat rolls down the middle
  • Slitter for "S" Cleats
  • No drive cleat rolls
  • For HVAC Sheet Metal Ductwork
  • approx. dimensions: 67"L X 25"W X 40"H
  • Approx. Weight: 800lbs
  • Location: CPM Warehouse

 

Return to TOP

 

Used Lockformer Drive Turn Hemming Roll Forming Machine

 

 

See More Pictures: Used Lockformer Rollformer

 

 

 

 

SOLD

Item #1639

  • Drive Bender Rollformer Machine
  • Manufacturer: Lockformer Rollformer
  • Electrics: 230V / 3 PH
  • capacities: 20 Ga Sheet Metal
  • Motor: 3HP
  • Skip Dent Indexing Roll With 4 pins & Control Lever To Form Drive Hem
  • Depth of Drive Hem: Approx 1/2"
  • Operating Speed: 60 FPM
  • Rollform every other Drive, Instead Of Using Cleatbender To bend It
  • Drive Turn Hemming Machine
  • approx. dimensions: 60" x 30" x 48"
  • approx. weight: 800 lbs
  • approx. new list price: $14,000.00
  • Location: CPM Warehouse

 

Return to TOP

 

Used Lockformer Large Pittsburgh Roll Former With Drive Cleat Rolls

 

 

Lockformer Rollforming machine for hvac duct and fitting fabrication

See More Pictures: Used Lockformer Pittsburgh Rollformer

 

 

 

 

Price - $5,000.00

Item #1663

  • Large Pittsburgh Rollfomer with Drive Cleat Rolls
  • Manufacturer: Lockformer
  • Condition: Used, Good
  • Capacities: 18-24 Ga. w/ Adjustment
  • Electrics: 230V / 3PH
  • Adjustment Dial For Material Thickness
  • Large Pittsburgh Rolls
  • Drive Cleat Rolls
  • No Slitter Attatchment
  • Approx. Dimensions: 36"L x 17"W x 40"H
  • Approx. Weight: 600Lbs
  • Location: CPM Warehouse

 

Return to TOP

 

Used Lockformer 20 Ga. Pittsburgh Roll Forming Machine with Flanger and Drive Cleat Rolls

 

 

used pittsburgh rollformer with flanger

See More Pictures: Used Lockformer Pittsburgh Rollformer

 

 

 

 

Price - $3,800.00

Item #1664

  • Pittsburgh 20 Ga. Rollforming Machine
  • Manufacturer: Lockformer
  • Condition: Used, Good
  • Capacities: 20 Ga. Mild Steel
  • Electrics: 230V / 3PH
  • Drive Cleat Rolls - Outboard
  • Auto Guide Fanger on Top
  • No Slitter Attatchment
  • Approx. Dimensions: 30"L x 13.5"W x 45"H
  • Approx. Weight: 300Lbs
  • Approx. New List Price: $8,000.00
  • Location: CPM Warehouse

 

Return to TOP

 

Used Lockformer Snapblock / Buttonlock Rollforming Machine

 

Lockformer rollformer

See More Pictures and Video: Used Lockformer Snaplock Roll Former

 

 

Price - $5,500.00

 

Item #1640

  • Manufacturer: Lockformer
  • Electrics: 230V / 3 PH
  • capacities: 24 ga Mild Steel
  • Male & Female Snaplock Rolls
  • 60 - 65 FPM
  • For HVAC Sheet Metal Ductwork
  • Approx. New List Price: $11,000.00
  • approx. dimensions: 58 1/2" x 24" x 41"
  • Approx. Weight: 1,000lbs (shipping)
  • Location: CPM Warehouse

 

Return to TOP

 

 

Used 20 Ga Lockformer Snaplock Buttonlock Roll Forming Machine

 

 

See More Pictures and Video:  Used Lockformer Male & Female Snaplock Roll Former

 

 

 

 

Price - $6,000.00

Item #1610

  • Manufacturer: Lockformer
  • snaplock rollformer / buttonlock rollformer
  • Electrics: 208V / 230V / 3 PH
  • capacities: 20 gauge Sheet Metal
  • 20 Gauge Male & Female Snaplock Rolls
  • Approx. dimensions: 59" x 25" x 43"
  • approx. weight: 750 lbs
  • approx. new list price: $12,000.00
  • Location: CPM Warehouse

 

 

 

 

Return to TOP

 

Used Engel 825 Roll Forming Machine W/ Male Buttonlock, & 4-N-1 Tap Collar

 

 

See More Pictures and Video: Used Engel 825 Roll Former W/ Male Snaplock, & 4-N-1 Tap Collar

 

 

 

 

Price - $7,000.00

Item #1611

  • Used Engel 825 Roll Forming Machine W/ Male Button Lock, & 4-N-1 Tap Collar
  • Manufacturer: Engel Industries
  • Model: 825
  • Capacities: 20 Ga Sheet Metal
  • 4 N 1 Tap collar and also Male Pittsburgh
  • Electrics: 208V/220/3PH
  • 7/16" Male Buttonlock
  • 7/16" Tap Collar Lock For Rectangular ductwork Takeoff
  • Approx. Dimensions: 80" X 28" X 40"
  • Approx. Weight: 900 Lbs
  • Approx. New List Price: $14,000.00
  • Location: CPM Warehouse

 

 

Return to TOP

 

 

Used Lockformer Cleatformer with "S" Cleat & Male and Female Snaplock

 

See More Pictures and Video: Used Lockformer Snaplock With S Cleat

 

 

 

 

Price - $8,000.00

Item #1645

  • Manufacturer: Lockformer
  • Electrics: 230V / 2PH
  • Motor: 5HP
  • capacities: 20 Ga. Sheet Metal - Snaplock
    22 Ga. Sheet Metal - "S" Cleats
  • Male & Female Snaplock Rolls
  • Slitter for "S" Cleats
  • "s" Cleat Rolls Mounted Inboard with Slitter attatchment
  • For HVAC Sheet Metal Ductwork
  • approx. dimensions: 67"L X 25"W X 45"H
  • Approx. Weight: 800Lbs
  • Location: CPM Warehouse

 

 

Return to TOP

 

 

Used Lockformer TDC Rollforming Machine

 

 

Lockformer TDC

See More Pictures and Video: Used Lockformer TDC Roll Former

 

 

 

 

SOLD 

Item #1619

  • Used Lockformer TDC Rollformer
  • Manufacturer: Lockformer Manufacturing Company
  • Model: TDC Sheet Metal Roll forming Machine
  • Transverse Duct Connector Rollformer For Connecting Rectangular Duct Sections Together
  • Capacities: 18-24 Ga TDC / 22 Ga Clip Rolls / 20-22 Ga for Nexus Rolls
  • Electrics: 230V/3PH
  • Motor: 10 HP
  • 14 Station Rollformer Machine
  • Speed: 60 FPM
  • Makes Three Profiles. Includes TDC Rolls, TDC Clip & Stitch Rolls, and Nexus "J" Flange Rolls (for forming 4-bolt connector frames like ductmate "j" flange and ward flange
  • Chain Driven Clip
  • Hinged Top For Easy Access
  • TDC Small Parts Feeder
  • Approx. Dimensions: 144"L X 36"W X 48"H
  • Approx. Weight: 3,000 Lbs
  • Approx. New List Price: $80,000.00
  • Location: CPM Warehouse

 

 

 

Return to TOP

Used Engel TDF Rollforming Machine W/ Standing S

 

 

See More Pictures and Video: Used Engel TDF Roll Former

 

 

 

 

SOLD

Item #1631

  • Used Engel TDF Roll Forming Machine W/ Standing S - Model 1640
  • Manufacturer: Engel Industries
  • Model: m-1640 TDF W/ Standing S
  • Capacities: 18 Ga. Sheet Metal
  • Electrics: 208V/3PH
  • Motor: 7.5 HP
  • 16 Station Rollformer
  • Speed: 75 FPM
  • Engel's TDF Machine Forms An Integral Flange On Straight Duct & Fittings For Connecting Duct Together
  • Optional Standing S Cleat Included
  • Optional Standing Seam Included
  • Approx. Dimensions: 135" X 45" X 53"
  • Approx. Weight: 3,000 Lbs
  • Approx. New List Price: $50,000.00
  • Location: CPM Warehouse

 

 

Return to TOP

 

 

 

 

 

Return to USED SHEET METAL MACHINERY Page

cincinnati precision machinery