|
|
Used Sheet Metal machinery for sale
To Search by Used Sheet Metal
Machinery Catagories :
| Used Sheet Metal Coilines
| Used Sheet Metal Shears | Used
Roll Formers | Used
HVAC Accessories | Used Sheet
Metal Brakes / Used Sheet Metal Folders | Used
Welders | Used Notchers | Used
Punching Machines | Used Duct Insulation
System | Used Saws | Used
Air Compressors | Used Clinching Machine
|
To Search by Used sheet metal
Equipment item number:
| 147 | 1079
| 1090 | 1122 | 1127
| 1134 | 1141 | 1153
| 1174 | 1175 | 1179
| 1181 | 1186 | ARE01
| ASP02 | AWHC546 |
BAI513 | BPM508 | DS548
| FRME01 | KRSM545 | LMP539
| LMP541 | LMP542 | MI520
| MI522 | MI523 | MI524
| MI525 | MI526 | MI527
| MNG530 | QC01 |
Cincinnati Precision Machinery is now offering a variety
of used sheet metal fabrication machinery. Take a look at our used sheet
metal equipment page often because we are always updating our site with
different used sheet metal fabricating machinery. We have everything
from used coilines, used benders to used hand tools.
If you have any questions, please call 513-860-4133.
If you have any used sheet metal equipment that you have
for sale and would like to post them on our web page please contact
us and we can help you out.
Used Coil Lines
Used
Iowa Precision / Welty Way Coil Line - $40,000.00 |
| 
|
Used Iowa Precision / Welty Way Coiline
Price
- $40,000.00
For
more pictures of this used Coil Line click here !!
Item # BAI513
- welty way uncoilier (4 manual underfed uncoilers)
- shoil sN#56921
- (Shear & Bead - 16 gauge capacity)
- welty way auto notcher SN#6914
- lockformer dropping conveyor 48" X 60" SN# CONV128
- Welty way transfer table
- lockformer duplex rollformer SN# 9D8430 (snaplock & pittsburgh)
- welty way / Bruct Brake SN#B6911 (not currently being used)
- new electronic eyes
- original manuals
- wiring diagrams are included
- S/N : see above
- Electrics : 230 / 3 phase
- Approx. MFG Date : 1968/1969
- approx. new list price : N/A
- Location : Offsite - available for Demo until october 27,
2009
|
Return to TOP
Iowa Precision Coil Line - $120,000.00 |
 |
Used Iowa Precision Coiline
Price
- $120,000.00
Item # QC01
- tDC
- Duplex Rollformer
- shear
- beader
- notchers
- wrap brake
- starter line 5' capacity
- res. 8' capacity
- electrics : 460/230
- approx. mfg. Date: starter line is late 1970's and downstream
components 1982
- Location : Offsite
|
Return to TOP
Used Sheet Metal
Shears
Used
Wysong Shear - $ 3,750.00 |
 |
Used Wysong Hydraulic Shear
Price
Reduced - $2,500.00
For
more pictures of this used Wysong Shear click here !!
Item#1079
- S/N : H52-429
- Electrics : motor rated for 208 - 220
- capacity : 52"
- 16 Gauge
- hand operated mechanical backgauge
- completely gone over by mechanics
- Approx. MFG Date : 1976
- approx. new list price - $5,900.00
- Location : CPM Warehouse
|
Return to TOP
Used Roper Whitney Shear
- $ 1,800.00 |
| SOLD |
Used Roper Whitney model 152K Shear
Price
- $ 1,800.00
Item#1180
- S/N : 152-6690-9-94
- Electrics : N/A
- capacity : 16 Gauge
- Approx. MFG Date : 1994
- approx. new list price - $ 3,550.00
- Location : CPM warehouse
|
Return to TOP
Used Rollformer
Used
Engel Model 825 Rollformer - $6,000.00 |
 |
Used Engel
Model 825 Rollformer (No Slitter)
Price
- $6,000.00
Item#1134
- S Drive
- 20 gauge
- male and female button lock
- Model 825
- S/N - 9-532
- Electrics: 230 v / 3 PH
- Approx. MFG Date : N/A
- approx. new list price : $14,635.00
- Location: CPM warehouse
|
Return to TOP
Used
Engel Pitts Rollformer - $4,000.00 |
 |
Used Engel
Pittsburgh Rollformer - model M-800P-20
Price
- $4,000.00
Item #1174
- Model : M-800P-20
- 8 station
- 20 gauge pittsburgh rollformer
- 20-26 gauge capacity
- triplex rolls ( tap - in - lock , standing seam, & right
angle flange )
- 20 gauge pittsburgh rolls
- S/N : 3464-97
- Electrics : 230V
- Approx. MFG Date : 1997
- approx. new list price : $ 11,040.00
- Location: CPM warehouse
|
Return to TOP
Used
Engel Rollformer - $7,500.00 |
 |
Used Engel
Rollformer
Price
- $ 7,500.00
Item#1175
- eight station rollformer
- slip and drive 20-26 gauge rollformer
- "S" cleats 22-28 gauge
- drive cleat 20-28 gauge (mounted down the center)
- 20 gauge male and female button punch (snaplock)
- Model : M-825
- S/N : 988-96
- Electrics: 230V
- Approx. MFG Date : 1996
- approx. new list price : $ 14,635.00
- Location: CPM warehouse
|
Return to TOP
Used
Engel Rollformer - $5,000.00 |
 |
Used Engel
Model 825 Rollformer
Price
- $5,000.00
Item#1122
- s & drive
- 20 gauge female pittsburgh rolls
- tri-Plex rolls
- separate slitter - not attached
- S/N : 320
- Electrics: 230, 3PH
- Approx. MFG Date : 1960's
- approx. new list price : $20,025.00
- Location: CPM warehouse
|
Return to TOP
Used
Engel Rollformer - $ 2,500.00 |
 |
Used Engel
Rollformer
Price
- $2,500.00
Item#LMP541
- model M-520-P
- Pittsburgh Rolls
- capacity : 20 gauge Max
- S/N : 222-98
- Electrics: 115
- Approx. MFG Date : 1998
- approx. new list price : $4,350.00
- approx. dimensions :
- approx. weight : 400 #
- Location: Offsite
|
Return to TOP
Used
Flagler Rollformer - $ 5,000.00 |
 |
Used Flagler
Rollformer
Price
- $5,000.00
Item#LMP542
- model HSBL
- Female S Lock w/ drive
- capacity : 22 gauge
- S/N : HSBL3271192
- Electrics: 3 phase
- Approx. MFG Date : 1992
- approx. new list price : $11,990.00
- approx. dimensions : 67"x27"x39"
- approx. weight : 860 lbs
- Location: Offsite
|
Return to TOP
Used
Engel Rol Formit Rollformer - $3,500.00 |
 |
Used Engel
Rol Formit Rollforming Machine
Price
- $3,500.00
Item#1090
For
more pictures of this used Engel Rollformer click here !!
- S/N - 304263
- Electrics: 240 V / 3 Phase
- Model #362 - d
- 8 Station
- drive cleat
- male & female 20 gauge button lock / snap lock
- approx. new list price - $9,000.00
- Location: CPM Warehouse
|
Return to TOP
USED
HVAC Accessories
Used
Gary Slitter - $2,000.00 |
 |
Used Gary Model 3350
Slitter
Price - $2,000.00
Item#1179
- Model : 3350
- s/N : 2302
- Electrics :220V
- Approx. MFG. Date : 1994
- Approx. New list price : $4,825.00
- includes 2 pair of 3/4 knives but no twist eliminator arms
- Location : CPM warehouse
|
Return to TOP
Used Tennsmith Cleat Bender - $300.00 |
| SOLD |
Used Tennsmith Cleatbender
Price - $SOLD
Item#1185
- Model : # CB18
- s/N : 19136
- Electrics : n/A
- Approx. MFG. Date : 1994
- Approx. New list price : $475.00
- Location : CPM warehouse
|
Return to TOP
Used
Pneumatic Chisels - $50.00 Each |
 |
Used Pneumatic Chisels
Price - $50.00 Each
Item#147
- Model :Various Chisels
- Location: CPM Warehouse
|
Return to TOP
Used
Toledo Scale - $250.00 |
 |
Used Toledo Scale
Price - $250.00
Item#1153
- s/N : PN13306000A
- Electrics : N/A
- Approx. MFG. Date : N/A
- Approx. New list price : $500.00
- Location : CPM warehouse
|
Return to TOP
Used
Roto Brush Duct Cleaning Machine - $5,000.00 |
 |
Used RotoBrush Silver
Package Air Duct Cleaning Machine
Price - $5,000.00
For
more pictures of this Used Roto-Brush Silver Package Air Duct
Cleaning Machine CLICK HERE!
Item#AWHC546
- Model : Silver Package
- includes a model 2600-08 flex-a-lite fogger ( cold fog applications)
for insectide applictions , disinfectant, deodorizers and chemicals
used for coating the insides of heat ducts or other surfaces.
- includes a Roto-Vision video inspection system which consists
of a color tv/vcr combination , CCD micro-video camera , power
pack/Transformer , extension rods and camera adapter , velcro
attachment straps to attach camera to rotobrush hose , roto
- vision wheels accessory
- includes Several attachments and brushes
- s/N : R017635
- Electrics :110 Volt
- Approx. MFG. Date : 2006
- Approx. New list price : $8,995.00
- Location : CPM warehouse
|
Return to TOP
Used
Peddinghaus 100 Ton Punch - $7,500.00 |
 |
Used Peddinghause model
3201-B 100 Ton Punch
Price - $7,500.00
Item#MI520
- model # : 3201-B
- 100 ton punch
- capacities : 1-1/4";12-1/2" throat
- comes with 2-station hydraulic pump that can hook up two
punches ( comes with one punch pump hung with spring)
- hydrualic unit : model h-12-ep-ep
- 1500lbs
- S/N : 1760
- Electrics : 220/440 volt - 3 ph
- Approx. MFG. Date : 1977
- Approx. New List Price : $ 25,500.00
- Location: Offsite
|
Return to TOP
Used
American Decoiler - $1,500.00 |
 |
Used American Decoiler
Price - $1,500.00
Item#MI522
- Model : 60
- 1000 lb capacity
- non motorized
- 19" maximum width: expanding mandrell
- approx weight : 800 pounds
- s/N :8047
- electrics : n/A
- approx. mfg. date : 02/1980
- approx. new list price : $2,300.00
- Location: Offsite
|
Return to TOP
Used
Rowe Machinery Easy Load - $4,000.00 |
 |
Used Rowe Machinery Easy
Load Conveyor
Price - $4,000.00
Item#MI523
- Model : 810 (Easy load)
- max capacities 1200 pounds
- max. oD 36"
- 1/2 hP
- s/N : 20513
- electrics : wired for a 110v or 220 v dual voltage
- approx. mfg. date : 1975
- approx. new list price : $ 9,000.00 ( this machine hasnt
been manufactured since 1996)
- Location: Offsite
|
Return to TOP
Used
Rowe Machinery Straightner - $5,000.00 |
 |
Used Rowe Machinery Straightner
Price - $5,000.00
Item#MI524
- Model : a-10
- minimum thickness .020 M.S. / maximum .105
- s/N : 22601
- electrics : 220 v /3 pH
- approx. mfg. date : 1978
- approx. new list price : $ 16,500.00
- Location: Offsite
|
Return to TOP
Used
Wire Decoiler - $ Make Offer |
 |
Used Wire Decoiler
Price - $ Make Offer
Item#MI525
|
Return to TOP
USED
Notchers
Used
Comaca Unipunch Corner Notcher - $ 5,500.00 |
 |
Used Comaca
Unipunch Corner Notcher
Price - $5,500.00
Item#DS548
- Model # : EHN 260
- 10 ga stainless steel
- 10" x 10" x 3/16" Mild Steel
- hydraulic - can be run by foot or hand control
- Condition : good
- approx. weight : 980 lbs.
- approx. dimenstions H55"xW24"xL25"
- electrics : 220V
- Approx. MFG Date : 1988
- s/N: 248
- approx. new list price : $14,000.00
- Location: Offsite
|
Return to TOP
Used
Lockformer Residential Notcher - $ 4,000.00 |
 |
Used Lockformer
Residential Notcher
Price - $4,000.00
Item#FRME01
- 20-28 gauge residential notcher
- v-notch 1-1/2" and corner notch 1-1/4"
- 5 notcher heads
- 1 HP
- electrics : 115 V
- Approx. MFG Date :
- s/N:
- approx. new list price : $11,021.00
- Location: Offsite
|
Return to TOP
Used
Engel Notcher - $ 3,500.00 |
| 
|
Used Engel
Notcher model 10LMMP
Price - $3,500.00
For
more pictures of this used Engel Notcher click here !!
Item#1127
- model # : 10LMMP
- 5 head - corner notch and v notch
- 20 gauge , 10'
- electrics : 220
- Approx. MFG Date : mid 1960's
- s/N: 3162-1
- approx. new list price : $ 14,705.00
- Location: CPM warehouse
|
Return to TOP
Used BRAKE / FOLDER
Used
Schechtl Folder - Brake - $27,000.00 |
 |
Used Schechtl
Folder / Brake
PRICE
- $ 27,000.00
Item#KRSM545
- Model : MAB 3100 CNC
- Approx. Mfg. Date : 2001
- S/N : 3357
- Electrics : 230 V AC 3 Phase
- Capacity : 14 ga. steel , .125 alum. , 18 ga. stainless steel
- 12" LCD touch monitor
- back gauges
- 3/8, 5/8, 1" front mount bending bars
- air is requiried at 50psi
- Location : Offsite
|
Return to TOP
Used
Pacific Brake - $30,000.00 |
|
Used Pacific
Brake
PRICE
- $ 30,000.00
Item#ASP02
- Model 150-10
- Approx. Mfg. Date : 1962
- S/N : 2476
- Electrics : 220 / 3 Ph.
- Capacity : 10 Foot X 1/4" Mild Steel
- needs a pit
- some tooling available w/ machine
- Location : Offsite
|
Return to TOP
Used Punching Machine
Used
Boschert Model CP-1250 Precision CNC Punching Machine - $ 95,000.00 |

|
Used Boschert
Model CP-1250 Precision CNC Punching Machine
Price
- $95,000.00
For
more pictures of this used Boschert Punch click here !!
Item#BPM508
- Serial# : 1004
- Approx. Mfg. Date : 2006
- Maximum punching force 36 Tons
- Maximum working range without repositioning 50” x 80”
- Maximum punching diameter 4”
- Maximum sheet thickness ¼”
- Maximum sheet weight with material clamps 440 lbs
- Maximum positioning speeds
X – axis, longitudinal 2360 ipm
Y – axis, cross 1180 ipm
- Stroke length (variable) 0 – 3.54”
- Maximum stroke rate 400 spm
- Axis moves of 0.004” 280 ( 385 ) spm
- Axis moves of 0.008” 200 ( 275 ) spm
- Axis moves of 1.000” 125 ( 175 ) spm
- Positioning accuracy +/- 0.002”
- Positioning repeatability +/- 0.001”
- Tool change time
Mono-Tool manual change 15 sec.
RevoTool automatic change 2 sec.
- Approximate weight 23,100 lbs.
- Approximate floor space required 12’ x 11’ x
6’ High
- Brushes in table
- Location: Offsite
*Tooling includes Boschert punch adjustment unit, 2 self locking
die adapters, 2 alignment rings, stripper
holder, and miscellaneous tools. CNCKad sytem software, a product
of Metalix
|
Return to TOP
Used
Automatic Insulation Line
Used
Engel / Duro Dyne Automatic Insulation Line - $60,000.00 |
 |
Used Engel / Duro Dyne Automatic Insulation
Line
Price
- $60,000.00
For
more pictures of this used Engel / Duro-Dyne Insulation Line click
here !!
Item # MNG530
- capacities : 5' duct (60")
- Engel Lin-o-Matic duct insulation system (LM-60-DD)
- the lin-o-Matic system will automatically decoil, cut-to-Length
and apply insulation to the duct with adhesive and fasteners.
- application sizes are 48" (1220mm) and 60" (1524mm)
duct liner.
- this machine was designed to run from an e - 2000 windows
based controller
- additional equipment included : pump is 40-80psi, aDH valve
50-70psi, pins brake/clutch 60-80psi, shear 40-80psi
- Duro-Dyne Multihead Pinspotter (FGMH)
- S/N : Engel 252-02
- S/N : Duro Dyne 400-716
- air is required (600 volt/30 amp)
- Electrics : 440/3/60hz(engel)
- Approx. MFG Date : 2002
- approx. new list price : $137,875.00
- Location : Offsite
|
Return to TOP
Used Welder
Used
DTI Peer Resistance Press Type Air Operated Welder - $15,000.00 |
 |
DT Peer Model P50-1-200-18S Standard #1 Size
Resistance Press Type Air Operated Welder
Price
- $15,000.00
Item # ARE01
- Model : PS50-1-200-18 S
- Electrics : 440/60/3PH
- Approx. Mfg. Date : 2002
- requires air - 80PSIG
- this machine is still like NEW (Never used)
- adjustable / retractable stroke
- hydraulic jack
- quick change hose fittings
- automatic air line fiter
- water flow pressure switch
- water saver control
- visi flow water indicators
- 18" throat depth
- ram stroke 3"
- 200 KVA
- 45,000 max short circuit @ 12" X 18" throat
- serial # : 3134
- Location: offsite
|
Return to TOP
Used Sheet Metal Saws
Used
Sears / Craftsman BandSaw -$250.00 |
 |
Used Sears
Craftsman 12" two speed BandSaw
Price
- $250.00
Item # 1186
- 1 1/8 HP
- 6" Depth of cut
- built in work light
- 80" blade
- 1/2" sanding belt
- tilt blade 0-45 degrees
- work surface 23"x27"
- model # : 12" two speed bandsaw
- this Sears bandsaw also comes with two new blades
- serial # : ?
- electrics : 120volt , 60HZ, 80 amps
- approx. mFG. date : ?
- approx. new list price : $429.00
- Location: CPM warehouse
|
Return to TOP
Used
Milwaukee Chop Saw -$150.00 |
 |
Used Milwaukee Chop Saw
Price
- $150.00
Item # 1141
- 14" blade diameter
- model # : 6175
- serial # : 821az97402184
- electrics : 110v , 15amp
- approx. mFG. date : sept. 1997
- approx. new list price : $306.00
- Location: CPM warehouse
|
Return to TOP
Used Air
Compressors
Used
Kellogg - American air compressor - $2,500.00 |
 |
Used Kellog - American Air Compressor
Price
- $2,500.00
Item # MI527
- s/N :833098
- electrics :220 / 440 3PH
- approx. mfg. date :N/A
- approx. new list price : $4,750.00
- Location: Offsite
|
Return to TOP
Used
Joy Air Compressor and Pneutech Turbo Flow Compresses Air Aftercooler
- $3,000.00 |


|
Joy Air Compressor and
Pneutech Turbo Flow Compresses Air Aftercooler
Used Air Compressor
Price
- $3,000.00
For
more pictures of this used Joy Air Compressor and Pneutech Aftercooler
click here !!
Item # MI526
- Joy air compressor
- model : twistair III series model TAO50
- field shop air compressor with cooler (listed below)
- 50 HP / 125 pSI MAX
- well maintained : no hydraulics : very quiet
- s/N :N/A
- electrics :220/120 amps
- approx. mfg. date :N/A
- approx. new list price :N/A
- Location: Offsite
- pneumatech turbo flow compressed air aftercooler
- model PAC - 64
- capacity 640 SCFM : max. pressure 3250 pSIG
- s/N :N/A
- electrics :230 v / 3 pH / 60
- approx. mfg. date : n/A
- approx. new list price : $3,396.00
- Location: Offsite
|
Return to TOP
Used
Clinching Machine
Used
Talok Clinching Machine- $ 1,800.00 |
 |
Used Talok Clinching Machine
Price
- $ 1,800.00
Item # LMP539
- model # : 2341
- serial # : H206
- electrics : 115
- air required : No
- capacities : 24 gauge Max
- dimensions : 24" X 36" Base
- weight : 300 lbs
- approx. mFG. date : N/A
- approx. new list price :$ N/A
- Location: Offsite
|
Return to TOP
THE MATERIALS MAY CONTAIN INACCURACIES AND TYPOGRAPHICAL
ERRORS. CPM DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE MATERIALS
OR THE RELIABILITY OF ANY ADVICE, OPINION, STATEMENT OR OTHER INFORMATION
DISPLAYED OR DISTRIBUTED THROUGH THE SITE. YOU ACKNOWLEDGE THAT ANY
RELIANCE ON ANY SUCH OPINION, ADVICE, STATEMENT, MEMORANDUM, OR INFORMATION
SHALL BE AT YOUR SOLE RISK. CPM RESERVES THE RIGHT, IN ITS SOLE DISCRETION,
TO CORRECT ANY ERRORS OR OMISSIONS IN ANY PORTION OF THE SITE. CPM MAY
MAKE ANY OTHER CHANGES TO THE SITE, THE MATERIALS AND THE PRODUCTS,
PROGRAMS, SERVICES OR PRICES (IF ANY) DESCRIBED IN THE SITE AT ANY TIME
WITHOUT NOTICE.
|