Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders

Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Notching Machines

Used Pipe Equipment

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

Tin Knocker Flangers & Flanging Attachments

Tin Knocker TK No. 16 Power Flanger

A perfect partner for the TK 16-gauge Pittsburg Roll Former
Puts a 3/8" outside flange on straight or curved sheet metal edges
Puts a flange on material with a diameter of as little as 2"

TK No. 16 Power Flanger Specifications:
Weight: 635 lbs
Dimensions: 36 x 28 x 48 in
Capacity: 16 Gauge Aluminum, Copper, Stainless Steel and Brass
Motor: 0.75 HP, 110V, Single Phase
Speed: Approx. 18' Per Minute
UPS: UPS Capable

Return to TOP

Tin Knocker TK No. 20 Power Flanger

This power flanger has the “auto-guide” feature, which automatically controls the forming of a right-angle flange. It will contour and follow any edge, straight or curved. Using the convenient table slot, the operator merely turns up a starting edge, starts the material through the rolls and lets go. This machine comes with a stand.

*Includes Stand

TK No. 20 Power Flanger Specifications:
Weight: 207 lbs
Dimensions: 25 x 25 x 41 in
Capacity: 20 Ga. and Lighter
Electrics: 115V/ 1 PH
Stand Is Included

Return to TOP

Tin Knocker TK Manual Flanger

Puts 7/32" flange on elbows and other radius fittings. Bench mounted, there is no gauge to set, and requires no special tools.

TK Manual Flanger Specifications:
Capacity: 20 Ga x 7/32"
Minimum Radius: 1 3/4"
UPS: UPS Capable
Dimensions: 26"x16"x12"
Weight: 35 lbs

Return to TOP

Tin Knocker 20 & 24 Ga Flanging Attachment

Add this option to turn up a 3/16 flange on straight or contoured sheet metal.

Return to TOP