CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers, coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.
 
 
 
 
 
 
 
 

youtube logo

Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders


Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Mechanical Piping Equipment

Used Notching Machines

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

 

 

Tin Knocker Box and Pan Brakes | Finger Brakes | sheet metal brakes

Tin Knocker Box & Pan Brake Model 2248

Steel welded construction, adjustable truss bars and bronze bushings. The brakes come with removable apron angle and apron insert, permitting .25" (6.35mm) reverse bends in lighter materials. The nose bar is removable as well, and the brakes are equipped with a precise stop rod for repeat bends.

22 Ga. Specifications:
Capacity: 22 Ga. (.75mm)
Bend Length: 48” (122cm)
Max Beam Lift: 7/8” (2 mm)
Max box Depth: 3” (76mm)
Min. Reverse Bend: 5/16 (7.9mm)
Min. Flange: 3/8” (9.5mm)
Dimensions: Approx. 64”L x 28” W x 32”H)
Weight: Approx. 356 lbs

 

Contact Us About The Tin Knocker Model 2248 Box And Pan Brake (Finger Brake)

Tin Knocker Box & Pan Brake Model 1648

Steel welded construction, with adjustable truss bars and bronze bushings. The brakes come with removable apron angle and apron insert, permitting .25" (6.35mm) reverse bends in lighter materials. The nose bar is removable as well, and the brakes are equipped with a precise stop rod for repeat bends.

16 Ga. Specifications:
Capacity: 16 Ga (1.5mm)
Bend Length: 48" (122cm)
Max Beam Lift: 1.25" (31.75mm)
Max Box Depth: 4" (101mm)
Min. Reverse Bend: .25 (6.35mm)
Min. Flange: 1" (25.4mm)
Finger Width: 2,3,4"
Dimensions: 64"Lx28"Wx32"H
Weight: 493 lbs

Contact Us About The Tin Knocker Model 1648 Box And Pan Brake (Finger Brake)

Return to the Tin Knocker Machinery Page

Return to the New Machinery Page

Return to the Home Page

cincinnati precision machinery