CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers, coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.
 
 
 
 
 
 
 

  

 

Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders


Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Notching Machines

Used Pipe Equipment

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

 

 



Bending Machines | Ductformer | Brakes

Ductformer's bending machines and folding machines are Made in the USA

 

TDFC Power Brake

 

The American made TDFC Power Brake is designed specifically for bending the 90° bends on rectangular duct work. It is an extremely efficient tool to use for bending straight duct joints and fittings for Full Wrapper or L-Shape Duct with TDFC style (F-Style & C-Style) flange connectors. One (1) Operator can quickly and easily slide a part into the machine and align the notches in an instant on the alignment blade located on the bending line.

 

 

Safety Features

A unique safety feature, the TDFC Power Brake can minimize serious injury because full clamping forces are not applied until the clamp is less then finger thickness distance from the metal to be formed. Full clamping forces are only applied when the clamp is less the ¼” from contacting the work metal.

Simple Installation

The TDFC Power Brake requires only 110V electrical power and shop clean / dry compressed air. No special high voltage wiring or expensive hydraulic oil is required. The machine can also be easily moved around in a shop with a pallet jack or fork lift. No expensive riggers are required as would be needed with a press brake. These factors will provide significant savings to the customer during installation or when the machine must be relocated in the shop.

View Machine Brouchure Here

Return To TOP

 

Fully Automatic Wrap Brake 60" or 72"

 

Ductformer’s Fully Automatic Wrap Brake 60" or 72" DB-60 (72) receives a part and bends the Pre-Notched and Rollformed Duct Section into either ‘L’ shape, ‘U’ shape, or Full Wrap Duct Sections. In fact the DB-60 (72) can be installed in any manufacturer’s Duct Coil Line providing Duct Fabricators the opportunity to upgrade and modernize existing Lines.

First the Duct section enters the DB-60 Auto Brake via the entrance conveyor. The conveyor will briefly pause allowing the Grip Feed to square and engage the part. The Grip Feed then moves the part into the bending station to the programmed distance (duct size), clamps and forms the 90° bend. After the bend cycle the process is repeated for Full Wrap Style Duct or ejected out of the Folding Station for L-Shape Duct.

The Model DB-60 (72) incorporates the latest technology offered by name brand industrial component manufacturers. Notably, these include PLC’s using Compact Flash Memory Backup, color Touch Screen Controls, brushless AC Vector Motion Control Drives for the part feeding, and a pressure compensated Hydraulic System.

 

Features

-Simple color Touch Screen controls
-Part Data entry in seconds
-Fully functional independent self contained control system integrates into any existing Line
-Remote or machine mounted Control Console options
-AC Vector Motion Control Drives that are powerful and maintenance free

Specifications

Max. Blank Length 125" Min. Blank Length 12" 60" (DB-60) or 72" (DB-72) MAX Width Min. L-Shape Section 4 x 8 Min. Wrap 6" x 6" Widths 44"-56"-68" TDFC 48"-60"-72" Slip & Drive Cycle Time – 30 Seconds Full Wrap Duct

View Machine Brouchure Here
View Control Upgrades Here

Return To TOP

Return to the Ductformer Machinery Page

Return to the Home Page

 

cincinnati precision machinery