Lion Machinery | Sheet metal fabricating machinery | Lion Cleat Benders | lion cheek benders

LION Closed End Cleat Benders & Cleat Folders

LION closed end cleatfolders (combination cleatbenders and barfolders) are pneumatic.

Specifications for the Lion Cleatbenders :

• Bends up to 36 inches
• Bends up to 18 gauge mild steel (i.e. 22ga, 20ga and 18ga)
• Bends up to 180+ degree drive hem/flange (i.e. 45, 90 and 180+ degrees)
• Bends in the flat or pre-formed duct including "L" shaped blanks
  ~4 second bend cycle
• 1836-0 bends 7/16 or 1/2 inch drive width
• All other 1836 models will bend 1/4-1 inch drive width (operator adjustment)
• Pneumatic machines require 90-100 PSI
• E+ 1836-0 electric machine requires a standard three prong electrical outlet

Standard features for these Lion Cleat Benders:

• Heat treated back gauge fingers to prolong part life
• Heat treated bending bar to prolong part life
• Extended finger guard to promote safety
• Slotted table bar for box and pan manufacturing
• Pneumatic machines include filter/regulator/lubricator

Optional features for the Lion Cleat Benders:

• Solid bending bar to limit finger dimples
• Solid table bar to limit finger dimples
  

Models of Lion Cleat Benders available:

Lion Cleat Bender/Folder Model 1836-3-3
Switch selectable 3 position, Three bends such as 180° , 90° and 45°

Lion Cleat Bender/Folder Model 1836-2-3
Switch selectable 2 position, Three bends such as 180° , 90° and 45°

Lion Cleat Bender/Folder Model 1836-1-3
Manually adjustable, Three bends such as 180° , 90° and 45°

Lion Cleat Bender/Folder Model 1836-0
Fixed 180* only (drive, cleat, hem, turn, flange) Standard Pneumatic

Lion Cleat Bender/Folder Model E+ 1836-0
Fixed 180* only (drive, cleat, hem, turn, flange) NEW Electric

LION PNEUMATIC OPEN THROAT CLEAT BENDERS

These Lion Cleat benders are pneumatic open throat cleat benders - these cleat benders are light weight, turns drives on "L" shapes, preformed ducts and flats. The table height of these Lion Cleat Benders are designed to decrease operator fatigue.

Specifications of Lion Pneumatic cleat benders model 2030A+:

Specifications of the Lion Pneumatic cleat bending machine model 2024A+:

Both of these lion pneumatic open throat cleat benders have a mild steel capacity of 20 gauge and lighter, a bend width of 7/16" to 1/2" and the air consumption of the lion cleatbending machines are <0.5 cu ft/cycle at 100 P.S.I. These cleat benders also have a table height of 36" and table depth of 15-1/2".

Lion Electric Open Throat Cleat Benders

These Lion Cleat benders are electic open throat cleat bender - these cleatbenders are light weight , turns drives on "L" shapes, preformed ducts and flats. The table height of these lion cleat benders are designed to decrease operator fatigue.

Specifications of the lion cleat bender model 2030E+:

Return to TOP

Contact us about ANY of the Lion cleat Benders.