CINCINNATI Precision Machinery - sheet metal fabrication machinery specialists...we are here to serve you for all of your sheet metal fabricating machinery Here at CPM we represent machinery for all of your sheet metal fabrication needs - everything from hand tools to lasers, coilines to brakes, notchers to ironworkers and much more. Please give us a call or glance through CINCINNATI Precision Machinery 's site for all your sheet metal fabrication needs.
 
 
 
 
 
 
 

  

 

Used Machinery

ALL Used Machinery

Used Air Compressors

Used Autobrakes / Sheet Metal Folders


Used Bar Folders

Used Sheet Metal Brakes

Used Cheek Benders

Used Cleat Benders / Cleat Folders

Used Clincher / Fasteners

Used Coil Lines

Used Corner Inserter Machines

Used Crimping / Beading / Rotary Machine

Used Drill Press

Used Duct Beading Machine

Used Duct Insulation Liner Cutters

Used Flangers / Flanging Machines

Used Gorelockers / Elbow Machines

Used Grinders

Used HVAC Accessories

Used HVAC Duct Insulation Pin Spotters

Used Ironworkers

Used Laser Cutting Machines

Used Notching Machines

Used Pipe Equipment

Used Pittsburgh Seamers

Used Plasma Cutting Machines

Used Press Brakes

Used Punching Machines

Used Sheet Metal Rolls

Used Roll Formers

Used Saws

Used Sheet Metal Shears

Used Sheet Metal Slitters

Used Spiral Machines

Used Welders

 

 

Manual Sheet Metal Cheek Benders

Tennsmith Manual Cheekbender

Tennsmith Model SD24-20 manual cheek bending machine - tennsmith cheekbender

Tennsmith's Model DS24-20 Manual cheek bender is a rugged tool built for increased productivity while getting the most consistent bends quickly. This model's two-way trunnion design holds the bending apron steady at the base of the bend ensuring accuracy throughout the length of the sheet.

This machine can be bench-mounted and adjusts for bends of 1/4 to 7/8 inches, 24 inches long. Tensmith's cheek bender handles mild steel to 20 guage.

Specifications for the Tennsmith model DS24-20 manual cheekbender:

  • Capacity , mild steel : 20 gauge
  • maximum bending : 24 inches
  • bend depth : 1/4 inch - 7/8 inch
  • dimensions with handles removed : 31x8-1/4x2-3/4 inches (LxWxH)
  • Shipping Weight : 80 lbs.

Lockformer Cheekbender

Lockformer Cheek Bender

A two-way trunnion keeps the bending bar in position at the starting point to assure perfect bends throughout the entire length. Mounting bolts are included. 20 gauge maximum.

Eagle Morlin Cheekbender - Model 1600

The Cheek Bender is a rugged tool built for increased productivity while getting the most consistent bends quickly. The Model 1600's two-way trunnion design holds the bending apron steady at the base of the bend, ensuring accuracy throughout the length of the sheet. This machine can be bench-mounted and adjusts for bends of 1/4 to 7/8 inches, 24 inches long. the Model 1600 cheek bender handles mild steel to 20-gauge.

Specifications for the Eagle Morlin Cheekbender:

  • Cheek Bender -- Model 1600
  • Capacity, mild steel -- 20 gauge/1.0 mm
  • Maximum bending -- 24 in./610 mm
  • Bend depth -- 1/4 in.-7/8 in. , 6.35 mm-22.2 mm
  • Dimensions, handles removed LxWxH 31 x 8-1/4 x 2-3/4 in. , 788 x 216 x 70 mm
  • Shipping Weight 80 lbs./37 kg

Return to TOP

Tin Knocker TK No. 24 Double Sided Cheekbender

For real production! This beefy little 24 inch, two sided cheek bender is built to last. Bench mounted, this machine comes ready for service. Consistent bends are a certainty due to the two-way trunnion keeping the bending apron in position at the origin of the bend. Adjusts for 1/4" to 7/8" bends (6.35mm - 22.2mm).

 

Specifications:
Capacity: 20 Ga Mild Steel (1.0mm)
Bend Length: 24" (61cm)
Note: Shims are required for 28 Ga and lighter material
Dimensions: 40"x12"x10"
Weight: Approx. 96 lbs. (44kg)

Return to TOP

Return to the New Machinery Page

Return to the Home Page

cincinnati precision machinery