|
|
brakes | Sheet Metal Bending Brakes | roper whitney brakes | connecticut
brakes
 
Roper Whitney
Connecticut Model 816 Brake
Specifications of the Roper Whitney Connecticut Model
816 Sheet Metal Bending Brake:
- Length of bed 97"
- Capacity on mild steel, 1" flange , With bending bar
and angle in place 16 ga. , with bending angle removed 20 ga. , with
bending bar and angle removed 23 ga.
- Minimum reverse bend(bar and angle removed) 1/4"
- Maximum lift of beam 1 5/8"
- Front to rear adjustment of beam 1 1/8"
Roper Whitney
Connecticut Model 1016 Brake
- Length of bed 121"
- Capacity on mild steel, 1" flange , With bending bar
and angle in place 16 ga. , with bending angle removed 20 ga. , with
bending bar and angle removed 23 ga.
- Minimum reverse bend(bar and angle removed) 1/4"
- Maximum lift of beam 2 1/4"
- Front to rear adjustment of beam 1 3/8"
Roper Whitney
Connecticut Model 1018 Brake
Specifications of the Roper Whitney Connecticut Model
Number 1018 Sheet Metal Bending Brake:
- Length of bed 121"
- Capacity on mild steel, 1" flange , With bending bar
and angle in place 18 ga. , with bending angle removed 22 ga. , with
bending bar and angle removed 25 ga.
- Minimum reverse bend(bar and angle removed) 1/4"
- Maximum lift of beam 1 5/8"
- Front to rear adjustment of beam 1 1/8"
Roper Whitney
Connecticut Model U414 Brake
Specifications of the Roper Whitney Connecticut U414
sheet metal Finger Brake:
- Length of bed 48"
- Capacity on mild steel, 1" flange , With bending bar
and angle in place 14 ga. , with bending angle removed 18 ga. , with
bending bar and angle removed 21 ga.
- Minimum reverse bend(bar and angle removed) 1/4"
- Maximum lift of beam 1 5/8"
- Finger widths 3",4",5"
- Maximum depth of box 6"
- Front to rear adjustment of beam 1 1/8"
- Bench size (optional) 56" long, 18" wide, 26"
high
Roper Whitney
Connecticut Model U416 Brake
Specifications of the Roper Whitney Connecticut Model
U416 sheet metal Finger Brake:
- Length of bed 48 1/4"
- Capacity on mild steel, 1" flange , With bending bar
and angle in place 16 ga. , with bending angle removed 20 ga. , with
bending bar and angle removed 23 ga.
- Minimum reverse bend(bar and angle removed) 1/4"
- Maximum lift of beam 1 1/4"
- Finger widths 2",3",4"
- Maximum depth of box 4"
- Front to rear adjustment of beam 5/8"
- Bench size (optional) 56" long, 18" wide, 26"
high
Roper Whitney
Connecticut Model 422 Brake
Specifications of the Roper Whitney Connecticut 422 sheet metal Bending
Brake:
- Length of bed 48 1/4"
- Capacity on mild steel, 3/8" flange , full length 22
ga.
- Minimum reverse bend 5/16"
- Maximum lift of beam 7/8"
Roper Whitney
Connecticut Model U218 Brake
Specifications of the Roper Whitney Connecticut Model U218 sheet
metal Box and Pan Brake:
- Length of bed 24 1/4"
- Capacity on mild steel, 3/8" flange , full length 18
ga.
- Minimum reverse bend 5/16"
- Maximum lift of beam 7/8"
- Finger widths 2", 3", 4"
- Maximum depth of box 3"
Roper Whitney
Connecticut Model
U422 Finger Brake
Specifications of the Roper Whitney Connecticut U422 sheet metal
Box and Pan (finger) Brake:
- Length of bed 48 1/4"
- Capacity on mild steel, 3/8" flange , full length 22
ga.
- Minimum reverse bend 5/16"
- Maximum lift of beam 7/8"
- Finger widths 2", 3", 4"
- Maximum depth of box 3"
Tennsmith Model HBT72-16 Brake
Tennsmith's new HBT72-16 is designed to provide forming
capabilities for complex parts . This machine is truly a universal
hand brake which allows for t he removal of both upper and lower segments
of fingers. Complex parts , such as, traverse duct and down flanged
parts, as well as architetural sheet metal and signage applications,
can easily be formed using this machine.
The Tennsmith HBT72-16 is built with the same high-quality
features and standards that Tennsmith brakes are recognized for throughout
the industry.
Specifications For Tennsmith Model HBT72-16
- Capacity , mild steel : 16 gauge
- capacity, stainless steel : 20 gauge
- bending length : 72 inches
- maximum lift of beam : 1 -1/2 inches
- front to rear beam adjustment : 1 inch
- maximum depth of box : 4 inches
- minimum reverse bend ( angle and
insert removed) : 1/4 inch
- top segment finger widths : 2,3,
and 4 inch
- Lower segment tooling width : 2,3,3.5,3.5,4,4,6,6,8,8,12,12
- Bending beam tooling segments :
2,3,3.5,3.5,4,4,6,6,8,8,12,12
- Maximum transverse bend (through
tooling centers ) : 2 inches
- maximum transverse bend (at either
end of the machine) : 3 inches
Return to the Home
Page
|
*
**Specials**