|
|
Roper whitney Hand Rolls | Sheet Metal Roll bending machine
Roper Whitney Manually operated Sheet Metal Rolls
Work rolls of precision turned and ground high carbon
steel. 2" , 2 1/2" , and 3" diameter rolls with wiring
grooves and fuly enclosed gear housings. 2" and 2 1/2" Diamater
have two driven rolls with 3rd roll drive optional : 3" rolls have
three driven rolls. Two handles provided for 2 1/2" and 3"
hand rolling machines sizes only. The upper roll lifts for convenient
removal of workpiece on these Roper Whitney manually operated sheet
metal rolls. These rolls can be bench mounted, with welded steel cabinet
stand is available. The rear rolls of no. 416 and no. 418 are provided
with three full length longitudinal grooves.
Roper Whitney Model
No. 381 Manual Rolls
Specifications:
- Capacity mild steel - 22 Gauge
- maximum sheet length - 36"
- roll diameter - 2 inches
- gearing ratio - direct drive
- wiring grooves (inches) - 3/16, 1/4, 5/16
Roper Whitney Model
No. 0381 Manual Rolls
Specifications:
- Capacity mild steel - 24 Gauge
- maximum sheet length - 42"
- roll diameter - 2 inches
- gearing ratio - direct drive
- wiring grooves (inches) - 3/16, 1/4, 5/16
Roper Whitney Model
No. 383 Manual Rolls
Specifications:
- Capacity mild steel - 20 Gauge
- maximum sheet length - 24"
- roll diameter - 2 inches
- gearing ratio - direct drive
- wiring grooves (inches) - 3/16, 1/4, 5/16
Roper Whitney Model
No. 390 Manual Rolls
Specifications:
- Capacity mild steel - 16-18 Gauge
- maximum sheet length - 36"
- roll diameter - 2 1/2 inches
- gearing ratio - 2 : 4 : 1
- wiring grooves (inches) - 1/4 , 9/32 , 5/16 , 3/8
Roper Whitney Model
No. 392 Manual Rolls
Specifications:
- Capacity mild steel - 20 - 22 Gauge
- maximum sheet length - 48"
- roll diameter - 2 1/2 inches
- gearing ratio - 2 : 4 : 1
- wiring grooves (inches) - 1/4, 9/32, 5/16, 3/8
Roper Whitney
Model No. 416 Manual Rolls
These hand rolls manufactured by Roper Whitney model No. 416 work
rolls of precision turned and ground high carbon steel. 2",
2 1/2"", and 3" diameter rolls with wiring grooves
and fully enclosed gear housings. 2" & 2 1/2" dia.
have two driven rolls with 3rd roll drive optional; 3" has
three driven rolls. Two handles provided for 2 1/2" & 3"
sizes only. Upper roll lifts for convenient removal of workpiece.
Bench mounted, with welded steel cabinet stand available for the
roper whitney model 416 hand rolls. The rear rolls of Roper Whitney's
No. 416 and No. 418 hand rolls are provided with three full length
longitudinal grooves.
Specifications:
- Capacity mild steel - 16 Gauge
- maximum sheet length - 36"
- roll diameter - 3 inches
- gearing ratio - 4 : 1
- wiring grooves (inches) - 3/8, 1/2, 5/8
Roper Whitney Model
No. 418 Manual Rolls
|
*
**Specials**
