HVAC Coilines by Engel Industries | Coil Lines | coil processing
Engel VALUE PLUS Coiline
Engel Industries Value PLUS Coiline systems
- the workhorse of the industry - a fully hydraulic unitized compact
Coiline has earned the reputation of providing one of the most accurate
and reliable machines available.
Standard Features on this Engel VALUE PLUS
Coiline :
drag off or powered cradle systmes available with 15,000 lb drive
system
manually adjustable underfed infeed guide for positive feed up to
the straightening rolls.
engel 2008 touch screen control
coiline download capable.
10 HP hydraulic drive unit
line speed : 55 FPM
jog speed : 25 FPM
hydraulic 3 roll straightener with 3-1/2" diameter solid steel
rolls
4-1/4" beading rolls
16 gauge capacity shear
18 gauge capacity beading rings
18 gauge capacity low profile notchers
16 gauge capacity "L" or full wrap brake
fully adjustablle industry proven cleat former to produce 48"
to 60" width's
male button punch caa be activated or deactivated from the control
fully expandable downstream to produce pittsburgh, snaplock and
TDF
Engel Industries provides the
fastest Automated Duct Systems Available in operation worldwide-
from coil to duct "L" sections averaging every 15 seconds
and a full wrap duct every 30 seconds.
The highest quality, most productive & cost efficient coil
line (duct manufacturing) machines today.
Individual components have provided the features that save you time
and money.
From underfed cradles through the hydraulic Unitized Compact Coiline®,
Pittsburgh/Snap Lock, Cleat Forming TDF® (Transverse Duct Flange),
Lin-o-matic with extruded glue system and either an "L"
or full-wrap brake, Engel's System has the features you need.
Engel's coil line system is controlled by the P.C.
based control with download capability.
Engel's "building block" concept allows you to purchase
a coiline starter system, a complete coiline
system or individual components to complete any existing partial coil
line system.
Basic components for Engel's Full 5'
/ or 6' Coiline:
Engel's Coiline II
blanking, notching and beading system can be either a stand alone
system or the start of a complete automatic fabricating system with
TDF®. Engels straightener, with four large diameter rolls, will
remove coil set from either under or overfed coils. The coil line
system is fully hydraulic including a heavy duty dual cylinder shear
with bronze gibs. The low profile hydraulic notchers will notch for
S & Drive, TDF®, Pittsburgh or Snap Lock. (You can add the
"flip of the switch" option to switch from TDF® to S
& Drive, or Pittsburgh.) Ring type beading is in accordance with
SMACNA standards. The self-contained hydraulic power unit, with its
reservoir tank, is mounted safely within the solid side plates.
A PC based controller, with proprietary
software, controls coiline machine functions and can accept down loading
from an IBM compatible in-house computer. The control is expandable
to handle a complete automatic duct fabricating system. The Engel
Compact Coil line II includes 4 drop-in cradles with a maximum
capacity of 15,000 lbs. per station. The coils are driven by Engel's
M-CDA-15-UF coil drive assembly with a direct coupled drive. You can
order any of Engel's optional cradle systems. This system will process
5' (1524 MM) galvanized steel into blanks for your plasma cutting
machine or notched blanks for "L" Section or full wrap ductwork.
Cut-to-length accuracy is +/- .020" (+/- 0.5MM).
FEATURES of the Engel Compact Coiline
II :
Capacities: 30 to 14 gauge, and up to 72" depending
on model.
Straightening Unit: Heavy duty straightening rolls are
4-1/4 inch diameter
In Line Slitting: Available upon request.
Low Profile Notching: Dies are adjustable from S &
Drive to TDF® with the flip of a switch. Notcher dies are mounted
in precision Die sets.
*
**Specials**
