Hydraulic Brakes | Roto-Die Hydraulic bending machines
Roto-Die Hydraulic
Sheet Metal Brakes
Roto-Die hydraulic benders are engineered to cut costs. The patented
Roto-Die principle reduces setup time by as much as 70 %, compared with
other power-forming equipment. Gauge and clearances are adjusted much
quicker than on conventional hand brakes with a Roto Die Hydraulic brake.
One-man operation cuts labor requirements in half on virtually all hand-brake
operations.
Click here for capabilities
or accessories for Roto-Die
Hydraulic Brakes
SUPERIOR IN MORE WAYS THAN ONE
Roto-Die is four metal precision forming tools in one. Merely by shifting
the selection lever, one operator can perform all basic sheet-metal
forming operations. No die to change. The Roto-Die hydraulic bending
brake forms full-length ducts, gravel stops, standing lock seams, flashing
and hemming operations accurately and economically. The compactness
inherent in the cylindrical die design permits acute reverse bends not
possible with conventional wide-bed machines. The Roto-Die Hydraulic
bender indexes quickly and accurately to all forming stations. Automatic
detention assures positive die alignment. Centerline machined upper
dies are instantly inter- changeable in all Roto-Die openings without
special stops or adjustments. A Roto-Die hydraulic brake is as simple
to operate as a hand break - but has infinitely more production capacity.
STROKE ADJUSTMENT SYSTEM
The Roto Die Hydraulic Brakes give you the speed, accuracy and reliability
to increase production by reducing set-up time and material handling.
The Back Gauge (which is an optional feature on roto die's hydraulic
sheet metal bending brake) enables precise settings and reliable repeatability
to improve forming accuracy through 31 inches of gauge travel. Rear
operated modification is also available when it is desired to eliminate
the front handle extension.
Capabalities
These are typical for Roto Die Hydraulic Brakes:
- All basic metal shapes formed without die change or major adjustment.
- Precision depth-of-stroke indicators permit recording initial settings
for repeat reference.
- Parallel bed and ram assures multiple precision bending over the
entire length of the bed without adjustment of the truss bars and
rods.
- Full wrap-around box and duct forming from either end of the machine.
- Smooth hydraulic power for safe, constant forming speed with no
whip of large sheets.
- Automatic protection from jamming, over-load and operator negligence.
Centralized tonnage control standard.
- Fail-safe design automatically returns ram to "up" position
in the event of an electrical or hydraulic failure.
- Rugged construction for long, trouble-free operation in heavy-duty
service.
Model 5 Roto
Die Hydraulic Bending Machine
SPECIFICATIONS and OVERALL DIMENSIONS for the Roto - Die Hydraulic
Brake Model 5 -
- Motor: 5 horsepower
- Bending capacity 7/8" die opening: 60 inch x 16 guage
- Length of stroke: 3 inches
- Strokes per minute(approx.): 20 to 50
- Die clearance: 2 1/8 inches
- Die space: 7 1/2 inches
- Length: 7 feet 19 1/2 inches
- Depth: 22 inches
- Height: 5 feet 3 1/2 inches
BED AND RAM PLATES - specifications for the Roto Die Hydraulic Brake
Model 5 -
- Thickness: 2 1/4 inches
- Ram depth:18 5/8 inches
- Bed depth: 25 inches
- Length depth: 72 inches
- Front and rear support arm: 39 inches
Model 10 Roto
Die Hydraulic Bending Machine
SPECIFICATIONS and OVERALL DIMENSIONS - for the Model 10 Roto Die Hydraulic
Brake -
- Motor: 7 1/2 Horsepower
- Bending capacity 7/8" die opening:120 inch x 16 guage
- Length of stroke:3 inches
- Strokes per minitue (approxmitley):20 to 50
- Die clearance: 2 1/8 inches
- Die space: 7 1/2 inches
- Length: 12 feet 1 inch
- Depth: 22 inches
- Height: 5 feet 3 1/2 inches
BED AND RAM PLATES - specifications for the Roto Die Hydraulic Brake
Model 10 -
- Thickness: 2 1/4 inches
- Ram depth: 25 inches
- Bed depth: 25 inches
- Length depth: 123 inches
- Front and rear support arm: 39 inches
Model 15 Roto
Die Hydraulic Bending Machine
SPECIFICATIONS and OVERALL DIMENSIONS - for the Roto - Die Hydraulic
Brake Model 15-
- Motor: 15 horsepower
- Bending capacity 7/8" die opening: 120 inch x 14 guage
- Length of stroke: 3 inches
- Strokes per minute (approx.): 20 to 50
- Die clearance: 2 1/8 inches
- Die space: 7 1/2 inches
- Length: 12 feet 6 1/4 inches
- Depth: 22 inches
- Height: 6 feet 1 inches
BED AND RAM PLATES - specifications for the Roto Die Hydraulic Brake
Model 15 -
- Thickness: 2 1/2 inches
- Ram depth:34 inches
- Bed depth: 34 inches
- Length depth:123 inches
- Front and rear support arm: 39 inches
Model 15/12
Roto Die Hydraulic Bending Machine
SPECIFICATIONS and OVERALL DIMENSIONS - for the Roto Die Model 15/12
Hydraulic Brake:
- Motor: 15 Horsepower
- Bending capacity 7/8" die opening: 144 inch x 16 guage
- Length of stroke: 3 inches
- Strokes per minitue (approx.): 20 to 50
- Die clearance: 2 1/8 inches
- Die space: 7 1/2 inches
- Length: 14 feet 6 inch
- Depth: 22 inches
- Height: 6 feet 1 inch
BED AND RAM PLATES - specifications for the Roto Die Hydraulic Brake
Model 15/12:
- Thickness: 2 1/2 inches
- Ram depth: 34 inches
- Bed depth: 34 inches
- Length depth: 147 inches
- Front and rear support arm: 39 inches
Return to TOP
|
*
**Specials**